March Equipment & Machinery Auction

Annex

Annex

Fed Ex 

Fed Ex

Fed Ex

Fed Ex

Fed Ex

Fed Ex

Fed Ex

Fed Ex

Fed Ex

Fed Ex

Fed Ex

Fed Ex

Fed Ex

480 Volt, 3 Phase, Fed Ex 

Fed Ex

Auction Room 

Located on Row 1 - Consignor - MDOT of Batesville

Located on Row 1 - Consignor - MDOT of Batesville

Annex

Annex

Annex

Annex

Annex

Annex

United Welding Services, 18" from bottom to top of toolbox, Very nice condition, Has key for lock

Shed

Shed

Shed

Shed

Shed

Like New Condition, Suspension Seat with Arm Rest, Adjustable Sliding Seat, Bay 1

Used very little, Row 5 

Annex 

Less than 100 hours on belt, blades, and complete gauge wheel assemblies.  Just completely serviced all grease fittings, flushed and filled gearbox with new gear oil.  Comes with (3) additional brand new blades. 

Good Shanks, Sweeps, and Bolts - Needs Coulter Bearing 

Overall Height:30 in
Overall Width:30.5 in
Overall Length:50 in
Fork Tines Capacity:2,500 lbs
Fork Tine:42" x 4" x 1.5"
Operating Weight:305 lbs

Overall Height:30 in
Overall Width:30.5 in
Overall Length:50 in
Fork Tines Capacity:2,500 lbs
Fork Tine:42" x 4" x 1.5"
Operating Weight:306 lbs

Overall Height:30 in
Overall Width:30.5 in
Overall Length:50 in
Fork Tines Capacity:2,500 lbs
Fork Tine:42" x 4" x 1.5"
Operating Weight:306 lbs

Overall Height:30 in
Overall Width:30.5 in
Overall Length:50 in
Fork Tines Capacity:2,500 lbs
Fork Tine:42" x 4" x 1.5"
Operating Weight:306 lbs

Working pressure: 21MPa,
 minimum drilling diameter 6", 
torque 950N(2300ft lbs), 
drilling rod speed 45rpm,
 required hydraulic flow 7-15GM,

Working pressure: 21MPa,
 minimum drilling diameter 6", 
torque 950N(2300ft lbs), 
drilling rod speed 45rpm,
 required hydraulic flow 7-15GM,

Working pressure: 21MPa,
 minimum drilling diameter 6", 
torque 950N(2300ft lbs), 
drilling rod speed 45rpm,
 required hydraulic flow 7-15GM,

Working pressure: 21MPa,
 minimum drilling diameter 6", 
torque 950N(2300ft lbs), 
drilling rod speed 45rpm,
 required hydraulic flow 7-15GM,

Weight：560 lbs
Maximum opening:80 in
Minimum opening:36 in
Maximum load capacity:2400 lbs
With synchronous valve

Width:48 in
Height (overall):18 in
Length (overall):30 in
Capacity:4.5 cu ft
Weight:280 lbs

Width:48 in
Height (overall):18 in
Length (overall):30 in
Capacity:4.5 cu ft
Weight:280 lbs

Width:80 in
weight 505Ibs, Capacity:0.46m³

Width:74 in
weight 505Ibs, Capacity:0.46m³

Width:84 in
weight 505Ibs, Capacity:0.46m³

Width:66 in
weight 505Ibs, Capacity:0.46m³

Capacity:3/4 Yard
Weight:461 lbs
Length:38.5 in
Length with Extension:68 in
Width:60 in
Height:30 in
Lift capacity Requirement:3,200 lbs

Trenching depth: 48in
Trenching width: 8in
Flow Rec:20-30 gpm
Clearing Auger Diameter:15 in

Fits all Class 1 tractors - Standard 2-inch trailer receiver
Heavy duty steel construction - includes top and bottom pins
Easy to move trailer with tractor tow bar
Quick and easy installation
Length (from the end of the pin): 32in
Height (bottom pin to top pin):21in Width: 4.7in

Fits all Class 1 tractors - Standard 2-inch trailer receiver
Heavy duty steel construction - includes top and bottom pins
Easy to move trailer with tractor tow bar
Quick and easy installation
Length (from the end of the pin): 32in
Height (bottom pin to top pin):21in Width: 4.7in

Width:44 in
Height:16 in
Cylinders:1-1/2" Bore X 6" Stroke (Rated to 3,000 PSI)
Material:3/8 in
Bucket side:3/8 in
Cutting Edge:3/8 in
Tine Spacing:2 in
Weight:240 lbs

Width:44 in
Height:16 in
Cylinders:1-1/2" Bore X 6" Stroke (Rated to 3,000 PSI)
Material:3/8 in
Bucket side:3/8 in
Cutting Edge:3/8 in
Tine Spacing:2 in
Weight:240 lbs

Width:44 in
Height:16 in
Cylinders:1-1/2" Bore X 6" Stroke (Rated to 3,000 PSI)
Material:3/8 in
Bucket side:3/8 in
Cutting Edge:3/8 in
Tine Spacing:2 in
Weight:240 lbs

8 ft. | 2.5" x 5" Option Extension Dimensions:
3" x 6"

8 ft. | 2.5" x 5" Option Extension Dimensions:
3" x 6"

8 ft. | 2.5" x 5" Option Extension Dimensions:
3" x 6"

8 ft. | 2.5" x 5" Option Extension Dimensions:
3" x 6"

8 ft. | 2.5" x 5" Option Extension Dimensions:
3" x 6"

Applicable products: Tractors
Three point suspension type: Cat.1/2
Supporting horsepower: 18 ~45

Applicable products: Tractors
Three point suspension type: Cat.1/2
Supporting horsepower: 18 ~45

Overall dimensions: 49*77*32 in
Bucket feed width：72 in
Equipment weight: 1053Ibs
Screen mesh size: 4/5*4/5in (optional) Bucket capacity 7/8 cubic yards, approx. 635 litres, with constant flow valve to protect the motor, suitable for skid steer loaders.

Overall dimensions: 49*77*32 in
Bucket feed width：72 in
Equipment weight: 1053Ibs
Screen mesh size: 4/5*4/5in (optional) Bucket capacity 7/8 cubic yards, approx. 635 litres, with constant flow valve to protect the motor, suitable for skid steer loaders.

Overall dimensions: 49*77*32 in
Bucket feed width：72 in
Equipment weight: 1053Ibs
Screen mesh size: 4/5*4/5in (optional) Bucket capacity 7/8 cubic yards, approx. 635 litres, with constant flow valve to protect the motor, suitable for skid steer loaders.

Suitable for ball sizes 36" 
(914 mm) to 48" (1219 mm), the Tree Shovel features a 3/8" (9.5 mm) plate with tapered and sharpened edges. 

Suitable for ball sizes 36" 
(914 mm) to 48" (1219 mm), the Tree Shovel features a 3/8" (9.5 mm) plate with tapered and sharpened edges. 

Suitable for ball sizes 36" 
(914 mm) to 48" (1219 mm), the Tree Shovel features a 3/8" (9.5 mm) plate with tapered and sharpened edges.

Weight: 960 lbs
Width: 84 in
Height: 27 in
Length: 36.68 in 
Blade Cut Width When Angle: 84 in
Blade Angle (degree): ±30°
Two-way Tilt Angle: ±10 ° 
Rated working pressure: 2500-3000 psi

Weight: 960 lbs
Width: 84 in
Height: 27 in
Length: 36.68 in 
Blade Cut Width When Angle: 84 in
Blade Angle (degree): ±30°
Two-way Tilt Angle: ±10 ° 
Rated working pressure: 2500-3000 psi

Weight: 960 lbs
Width: 84 in
Height: 27 in
Length: 36.68 in 
Blade Cut Width When Angle: 84 in
Blade Angle (degree): ±30°
Two-way Tilt Angle: ±10 ° 
Rated working pressure: 2500-3000 psi

Weight: 960 lbs
Width: 84 in
Height: 27 in
Length: 36.68 in 
Blade Cut Width When Angle: 84 in
Blade Angle (degree): ±30°
Two-way Tilt Angle: ±10 ° 
Rated working pressure: 2500-3000 psi

6.5 HP Loncin G200F Engine
Gross Welght: 225 lbs
Dlmenslon: 68"x 20"x 35"

6.5 HP Loncin G200F Engine
Gross Welght: 225 lbs
Dlmenslon: 68"x 20"x 35"

6.5 HP Loncin G200F Engine
Gross Welght: 225 lbs
Dlmenslon: 68"x 20"x 35"

This machine has a lifting capacity of 840 lbs and is powered by a 23 hp gasoline engine with a displacement of 739 cc and two cylinders. It runs at a motor speed of 3600 rpm with a maximum torque at 2500 rpm. The engine is air-cooled, the fuel tank capacity is 18.2 lbs, and it features a hydraulic four-wheel drive system.

This machine has a lifting capacity of 840 lbs and is powered by a 23 hp gasoline engine with a displacement of 739 cc and two cylinders. It runs at a motor speed of 3600 rpm with a maximum torque at 2500 rpm. The engine is air-cooled, the fuel tank capacity is 18.2 lbs, and it features a hydraulic four-wheel drive system.

This machine has a lifting capacity of 840 lbs and is powered by a 23 hp gasoline engine with a displacement of 739 cc and two cylinders. It runs at a motor speed of 3600 rpm with a maximum torque at 2500 rpm. The engine is air-cooled, the fuel tank capacity is 18.2 lbs, and it features a hydraulic four-wheel drive system.

This machine has a lifting capacity of 840 lbs and is powered by a 23 hp gasoline engine with a displacement of 739 cc and two cylinders. It runs at a motor speed of 3600 rpm with a maximum torque at 2500 rpm. The engine is air-cooled, the fuel tank capacity is 18.2 lbs, and it features a hydraulic four-wheel drive system.

to Category 1 & 2, 3 Point Quick Hitch.
- Reinforced with 3.25”x3.25” tubular steel.

to Category 1 & 2, 3 Point Quick Hitch.
- Reinforced with 3.25”x3.25” tubular steel.

Category 1, 3-Point Quick Hitch
Rubber Handle Grips
Cam Operated Latch
Spring Loaded Locking Device
Tapered Top Hitch Point Mounting Bracket
Non-rotating Dichromatic Draw Pins and Adapter Bushings
Maximum Recommended Horsepower 100
Comes Assembled Complete with 1-1/8″ Mounting Pins and Adapter Bushing
Lift Arm Spacing for Cat 2: 32″

Category 1, 3-Point Quick Hitch
Rubber Handle Grips
Cam Operated Latch
Spring Loaded Locking Device
Tapered Top Hitch Point Mounting Bracket
Non-rotating Dichromatic Draw Pins and Adapter Bushings
Maximum Recommended Horsepower 100
Comes Assembled Complete with 1-1/8″ Mounting Pins and Adapter Bushing
Lift Arm Spacing for Cat 2: 32″

Bucket Width:75"
Working Width:72"
Overall Width:79"
Overall Length:62.4"
Overall Height:21.5"
Drum Diameter:12.5"
Replaceable Teeth:84
Required Flow:12-20 gpm 3000 psi
Operating Weight:990 lbs

Input Voltage:110V/220V
Frequency:50/60HZ
Rated input capacity:4.8KVA
Max No-Load Voltage:300V
Current Range:10-40A
Arc starting method:HF are starting
Cutting Thickness:6-12mm

Input Voltage:110V/220V
Frequency:50/60HZ
Rated input capacity:4.8KVA
Max No-Load Voltage:300V
Current Range:10-40A
Arc starting method:HF are starting
Cutting Thickness:6-12mm

Applicable products: Tractors
Three point suspension type: Cat.1
Supporting horsepower: 18 ~45

Applicable products: Tractors
Three point suspension type: Cat.1
Supporting horsepower: 18 ~45

Gross Weight(G.w.):38.58 LBS
Net Weight(N.w.):31.75 LBS
Height: 86.6 in
Carton size:18.1Lx18.1Wx28.3HINCH

Unused Paladin 40-Gallon 2-Stage Truck Mounted Air Compressor

Specifications:
• Tank capacity: 40 gal
• Max. pump running pressure: 175 PSI at 80% duty cycle
• Air delivery:
14.5 CFM @ 175 PSI
16.5 CFM @ 135 PSI
18.7 CFM @ 90 PSI
20.6 CFM @ 40 PSI
• 1-½"NPT ball valve
• 3 AMP battery charging circuit (battery not included)
•Powder-coated tank finish
•Engine: Briggs&Stratton 10HP,4-stroke,OHV,gasoline
•Displacement: 306 cc
•Regulated charging system
•Low oil shut down
•Start type: recoil/electric

UNUSED Paladin 40 Gallon 2-Stage Truck Mounted Air Compressor

Specifications:
• Tank capacity: 40 gal
• Max. pump running pressure: 175 PSI at 80% duty cycle
• Air delivery:
14.5 CFM @ 175 PSI
16.5 CFM @ 135 PSI
18.7 CFM @ 90 PSI
20.6 CFM @ 40 PSI
• 1-½"NPT ball valve
• 3 AMP battery charging circuit (battery not included)
•Powder-coated tank finish
•Engine: Briggs&Stratton 10HP,4-stroke,OHV,gasoline
•Displacement: 306 cc
•Regulated charging system
•Low oil shut down
•Start type: recoil/electric

Square Drive  : 1"
Air Pressure  : 100-170 psi
Mechanism  : Pinless Hammer
Max Torque   :  2800 ft·lb
Applicable Torque : 1106-1895 ft·lb
Blade Length   :  2.1in
Weight   : 34Ibs
Anvil Length   :  8.85in
No-Load Speed   :  4200rpm
Air Inlet   :  1/2in PT
Hose Inner Dia.  : 1/2in
SHIPPINGWEIGHT:39LBS